Loading ...
Loading ...
Loading ...
Step 13. Attach the (2) Leaf Support Wings to outside of Right and Left Sides, on right and one
Left with (8) #8 x 5/8" Flathead Screws. Now, attach the (2) Bronze Strike Washers for the
Round Magnet to each side with (2) #5 x 1/2" Flathead Screws (as shown in FIG. 13).
FiG. 13
Right Left Wing
#8x5/8"
Flathead Screw
NOTE:
Support Wings are to fold
toward rear of cabinet.
Step 14. With an assistant, grasp the Top and Leaves together (top assembly) and turn the Top over and
guide the Connecting Bolts into the corresponding holes in the Sides and Partition (as shown
FIG. 14). Turn the Cams to the locking position. Some adjustment in the location of the Platform
can be made so as to permit Freearm position (see page 15). Just loosen the Screws holding the
Platform to the Wings; align and retighten.
FiG. 14
Y
J
I
' __nTop Assembly
I1
Front View 98300-12
98301-12
Page 12 98302-12
Loading ...
Loading ...
Loading ...