Loading ...
Loading ...
Loading ...
Operations
Carpet cleanin_l continued
7. Cleaning strokes Release the trigger
and make one slow forward and back-
ward pass over the same area to remove
any residual dirty water and aid in drying.
Repeat cleaning passes until solution being
pulled up appears clean. Continue passes
without pressing the trigger untilyou can't
see any more water being pulledup.
o
o
10.
Removethe dirty water tank by pulling the
handle to the upright positionand lift up. Carry
thetank like a bucketto a utililysink or outside
where you will disposeof thedirly water.
Unlatch the top of the tank from the bottom by
pushing the handle all the way fort,yard and
lifting the top off. Pourdirty water into the sink.
Note: You may notice hair and debris
deposits on the carpet or in the tank
that were loosened by the cleaning
action (especially with newer carpets
that have never been deep cleaned
before). This debris shouldbe picked
up and thrown away.
Fill the clean water tank with clean hot tap
water and follow instructions 2 - 7 to
continue cleaning.
Maintenance and care
Machine storable
Once your cleaning is complete, make
sure both the dirty and clean water
tanks are emptied, rinsed out and dried
before the next use.
Note: Store cleaner in a protected, dry
area. Since this product uses water, it
must not be sto_l where there isa
danger of freezing. Freezing will dam-
agelntemal components and void the
warranty.
8.
9.
CAUTION:
Do notoverwet.Takecare notto
run overlooseobjectsor edges
of area rugs.Stal[ingbrushmay
resultin prematureI:]eltfailure.
6
www.bissellcommercial.com 855.544.7336
Loading ...
Loading ...
Loading ...