Loading ...
Loading ...
Loading ...
Operations
Before you clean
1. Move furniture to another area if clean-
ing the entire room (optional.)
o
3.
Vacuum area with a dry vacuum cleaner
thoroughly before deep cleaning.
Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the
corner farthest from your exit.
Carpet cleanin_l
1. Remove dirty water tank. Pull dirty water
tank handle to upright position and lift up
to remove dirty water tank.
o Liftcleanwater tank from the baseof machine.
A. Unscrew cap on top of the clean
water tank. Fill tank to FILL line with
clean, hot tap water.
B. Measure BISSELLformula using cap
on tank. Fill cap to line mice For each
full tank of water. Always use genuine
BISSELLformulas to maximize clean-
ing and for the safety of your machine
C. Screw cap back onto clean water
tank and place tank onto base of the
machine.
°
°
5.
°
Replace dirty water tank securely on top
of the clean water tank and push handle
back to lock into place.
Plug into a proper outlet and turn the
power switch to the ON ( I ) position.
Detent handle by pushing down on the
green lever on the back of the machine
while pulling back.
Cleaning strokes. While pressing the
trigger, make one slow forward wet pass
andanother back. Letthe formula and
DirtLifter PowerBrushesdo the work for you.
Note: Your machine is equipped
with a circuit breaker that will
automatically shut off the brush if
a large or loose object is caught
in the brush roll. If that happens,
be sure to unplug your machine,
remove the foreign object and then
_lug machine in to reset the circuit
reaker.
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggra-
vate th_scondition.
1,
5,
5
www.bissellcommercial.com 855.544.7336
Loading ...
Loading ...
Loading ...