Loading ...
Loading ...
Loading ...
Cleaning and servicing en
33
3. Push the bristle ring down and
lock it in place.
→Fig.
a The Multi-Use-Brush is ready to
use.
4. Vacuum using the Multi-Use-Brush.
5. Press the two locking catches on
the bristle ring.
6. Push the bristle ring upwards and
lock it in place.
→Fig.
7. Push the floor tool or the tube onto
the Multi-Use-Brush.
8. Press the release button and re-
move the Multi-Use-Brush to re-
move.
→Fig.
Stopping and parking the ap-
pliance
1. Switch off the appliance.
2. If you want to stop vacuuming for
longer use periods, use the stor-
age aid on the underside of the
appliance.
→Fig.
3. Use the parking aid for shorter
programme pauses.
→Fig.
Dismantling the appliance
1. Disconnect the connection
between the telescopic tube and
the handle.
→Fig.
2. Push the two locking catches to-
gether.
3. Pull the tube out of the appliance.
→Fig.
Cleaning and servicing
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Motor protection
Pay attention to dirt in the motor.
ATTENTION!
Dirt in the motor may damage the
motor.
Never operate the appliance
without a dust bag.
Never operate the appliance
without the motor protection filter.
Never operate the appliance
without the exhaust filter.
Cleaning products
Only use suitable cleaning products.
ATTENTION!
Using unsuitable cleaning products
or incorrect cleaning may damage
the appliance.
Do not use harsh or abrasive de-
tergents.
Do not use cleaning products with
a high alcohol content.
Do not use hard scouring pads or
cleaning sponges.
Wash sponge cloths thoroughly
before use.
Cleaning the motor protection
filter
Tip:To achieve the best possible va-
cuuming results, tap out or wash the
motor protection filter at regular inter-
vals. After vacuuming fine dust
particles, clean or replace the motor
protection filter in order to guarantee
the appliance's suction.
1. Switch off the appliance.
Loading ...
Loading ...
Loading ...