Loading ...
Loading ...
Loading ...
• 15 •
PROBLEM POSSIBLE CAUSE REASON/SOLUTION
Green LED is solid
and the display
shows ANALYZING
BATTERY.
The charger needs to check
the condition of the battery.
The Green LED will be
solid when the charger is
checking the condition of
the battery.
Green LED is ashing
and the display shows
CHARGE ABORTED
BAD BATTERY.
The battery is sulfated.
The battery is too large for
the charger.
The battery voltage is still
below 10V after 2 hours of
charging.
Reset the charger by briey
unplugging it.
You need a charger with a
higher amp rate.
Have the battery checked.
The display shows
CONNECT CLAMPS.
The clamps are not making
a good connection.
Check for poor connection
at battery and frame.
16. BEFORE RETURNING FOR REPAIRS
• When a charging problem arises, make certain that the battery is capable of
accepting a normal charge. Double check all connections, the AC outlet for
a full 120 volts, the charger clamps for correct polarity and the quality of the
connections from the cables to the clamps and from the clamps to the battery
system. The clamps must be clean.
• When an UNKNOWN OPERATING PROBLEM arises, please read the
complete manual and call the customer service number for information.
This will usually eliminate the need for return.
If the above solutions do not eliminate the problem,
or for information about troubleshooting or replacement parts,
call toll-free from anywhere in the U.S.A.
1-800-621-5485
Loading ...
Loading ...
Loading ...