Loading ...
Loading ...
Loading ...
85
Advanced Operation
1
Press and hold the RC SETUP button for at
least 3 seconds.
• The IR segment blinks twice.
2
Press the 9, 7, 8 button (9
→→
7
→→
8) in that order.
• The IR segment blinks twice and the system call
registration mode is set.
3
Press the SYSTEM CALL button (1, 2 or 3) for
which you want to register the operations.
4
Press the buttons you want to register in the
order of the operations to be performed.
Example:Press the ON button.
↓
Press the CD button of the MODE
SELECTOR button.
↓
Press the
1 button.
The mode can be switched by pressing a MODE
SELECTOR button.
5
Repeat steps 3, 4 to register the desired
buttons.
6
Press and hold the RC SETUP button for at
least 3 seconds.
• The IR segment blinks twice and the setting is
completed.
1
Press the AMP button to select “SYSTEM
CALL”.
2
Press the SYSTEM CALL button (1, 2 or 3) at
which the operation are registered
• The stored signals are transmitted successively.
2
Press the 9, 8, 4 button (9
→→
8
→→
4) in that order.
• The IR segment blinks twice and the punch through
setting mode is set.
3
Press the MODE SELECTOR button forthe device
to be punched through (CD, DVD or VCR).
4
Press the button to be punched through (1, 2,
6, 7, 8, 9 or 3).
5
Press the MODE SELECTOR button for the
device to be punched through (TV orSAT/CBL).
6
Press and hold the RC SETUP button for at
least 3 seconds.
• The IR segment blinks twice and the setting is
completed.
1
2
Press and hold the RC SETUP button for at
least 3 seconds
• The IR segment blinks twice.
Press the 9, 7, 3 button (9
→→
7
→→
3) in that order.
• The IR segment blinks twice and the backlight
lighting time setting mode is set.
Setting the back light’s lighting time
3
Press the NUMBER button of
(
1 to 5) you want
to set the lighting time.
• The IR segment blinks twice.
Lighting time: 1 : 5 sec
2 : 10 sec (factory default)
3 : 15 sec
4 : 20 sec
5 : 25 sec
• CD, DVD or VCR mode buttons can be assigned to unused
TV and SAT/CBL mode buttons.
• For example, when DVD mode operations are assigned to
TV mode buttons, the DVD mode can be operated while in
the TV mode.
1
Press and hold the RC SETUP button for at
least 3 seconds.
• The IR segment blinks twice.
Setting the punch through function
• The brightness of the display can be adjusted in 5 steps
(Default : level 3).
• First set the auto brightness adjustment setting to “OFF”.
1
Press and hold the RC SETUP button for at
least 3 seconds.
• The IR segment blinks twice.
2
Press the CHANNEL button.
•Press the + button to increase the brightness 1 step.
•Press the – button to decrease the brightness 1 step.
Setting the brightness
2 Registering
2 Operating
Loading ...
Loading ...
Loading ...