Loading ...
Loading ...
Loading ...
9
5. Remove two screws from the top hinge cover located on the top
of the fridge & slide the cover out.
6. Unscrew the adjustable feet (8) on the bottom.
7. Unscrew the lower hinge (7).
8. Remove the door (5).
9. Unscrew the middle hinge.
10. Remove the freezer door.
11. Unscrew the hinge pin from upper hinge (6) and screw it to the
other side of the fridge.
12. Unscrew the hinge stoppers (including hinge pin) from the
freezer door and fridge door and place them on the other side.
13. Check now if all the hinges and shafts are moved to same side
14. Attach the freezer door to the upper hinge.
15. Attach the middle hinge to the freezer door and screw them
together.
16. Attached the fridge door (5) to the middle hinge.
17. Attach the lower hinge (7) to the door and screw them together.
18. Screw on the top hinge cover
19. Cover the middle hinge holes with 2 stoppers.
20. Put glass shelves, crisper and egg tray to their original position.
21. Make sure that the door is in the vertical position and can be
closed easily.
IMPORTANT: After reversing the door hinge, the door gasket may
be loose. Should you notice a gap between the gasket and the
cabinet, use a hairdryer or heat gun and heat the gasket while on
the appliance. The gasket will expand to meet the cabinet. Allow 30
mins to cool before opening. A correct gasket positioning is the key
to prevent refrigerated air from escaping.
DOOR REMOVAL AND REVERSAL continued
Loading ...
Loading ...
Loading ...