Loading ...
Loading ...
Loading ...
46
47
English
Setting the Local (Secondary) Time4.
Local time is a function that can be used to set the time for another region separately
from the current time.
Local time can be adjusted as a time difference in units of hours, taking the current time
(time mode/TME) as a reference. The minutes and seconds cannot be altered and will
match the current time set in TME mode.
[Adjusting the Time Difference]
With the crown pulled out one step to position 1.
1, rotate the crown to align the mode hand to
local time [L-TM] mode as indicated on the
mode sub dial.
Pull the crown out two ‘steps’ to position 2 2.
(local time adjustment position).
[Chronograph Measurement]
With the crown one step out in position 1, rotate the crown to align the mode hand to 1.
chronograph [CHR] mode as indicated on the mode sub dial. Return the crown to the
normal position to complete the adjustment.
Press and release the upper right button (A) to start and stop measurement. Each time 2.
the upper right button (A) is pressed a confirmation sound is emitted.
Pressing and holding the upper right button (A) for approximately 2-seconds while 3.
the chronograph is stopped will reset the chronograph second and minute to the 0
position.
Note:
Always reset the chronograph after measurement has ended as this reduces
consumption of energy.
Reset
Measurement
Stop
(A)
(A)
(A)
Hold down button (A) for approximately 2 seconds
Setting the local time
Normal position
(2)
Loading ...
Loading ...
Loading ...