Loading ...
Loading ...
Loading ...
6
EN
First use
• To have the product ready for operation before
calling the authorised service agent, make sure
that its location and power supply installations are
appropriate. If they are not, call a qualified electrician
to have any necessary arrangements carried out.
• Make sure that the power connections of the product
are in accordance with the instructions given in
relevant chapters of this manual.
Disposing of packaging material
Packaging materials are dangerous to children. Keep
packaging materials in a safe place out of reach of
children. Packaging materials of your product are
manufactured from recyclable materials. Sort and
dispose of them in accordance with recycled waste
instructions. Do not dispose of them with normal
domestic waste.
Transportation of the machine
1. Unplug the machine from the mains.
2. Remove the water drain (if any) and chimney
connections.
3. Drain water remained in the machine completely
before transportation.
Disposing of the old machine
Dispose of your old machine in an environmentally
friendly manner.
Refer to your local dealer or solid waste collection centre
in your area to learn how to dispose of your machine.
Before disposing of your old machine, cut off the power
cable plug and make the loading door lock unusable to
avoid dangerous conditions to children.
hose gets out of its housing during water discharge.
Important:
• The hose should be attached to a height of maximum
80 cm.
• You must be careful not the pinch or bend the hose.
• The end of the hose should not be bent, it should not
be stepped on and it must not be folded between the
drain and the machine.
Adjusting the feet
In order to ensure that your machine operates more silently
and vibration-free, it must stand level and balanced on its
feet. Balance the machine by adjusting the feet.
Rotate the feet to adjust until the machine stands level and
firmly.
CNever unscrew the adjustable feet from their housings.
Electrical connection
Connect the machine to a grounded outlet protected
by a fuse of suitable capacity as stated in the technical
specifications table. Our company shall not be liable for
any damages that will arise when the machine is used on a
circuit without grounding.
• Connection must comply with national regulations.
• If the current value of the fuse or breaker in the house
is less than 10 Amps, have a qualified electrician
install a 10 Amp fuse.
• Power cable plug must be within easy reach after
installation.
• The voltage and allowed fuse or breaker protection are
specified in the “Technical Specifications” section.
• The specified voltage must be equal to your mains
voltage.
• Do not make connections via extension cables or
multi-plugs.
• The main fuse and switches must have a contact
distance of minimum 3 mm.
BDamaged power cable must only be replaced by a
qualified electrician.
BIf the product is faulty, it must not be operated unless it
is repaired! There is the risk of electric shock!
Loading ...
Loading ...
Loading ...