Loading ...
Loading ...
Loading ...
3938
Changing Baffle Filters
Replacing Light Bulbs
CHANGING PARTS
REPLACING THE LIGHT BULBS IN YOUR RANGE HOOD
1. Remove baffles.
2. Squeeze the old LED light casting out until it falls out of the socket.
3. Disconnect the plug wires from the light wire.
4. Reconnect the LED plug into the light wire.
5. Press light assembly into the socket.
NOTE: Never work on or clean the range hood while power is ON. Always unplug
the unit or switch the electrical breaker to the off position.
Installation Tutorial Video
PROFESSIONAL SERIES BAFFLE FILTER CHANGE
Covering Models 696, 697, 697i (Island), KECOM, KECOMi (Island), 695, 698,
and 721 Inserts
Professional series hoods are equipped with 2 removable dishwasher safe baffle
channels (one for series 695 and 698 inserts) that the baffle filters rest in. To install
the channels, place inside the hood, right under the front and back edges of the
hood. The channel is kept in place by installation pieces on the sides and back of the
baffle channel. Figure 1
NOTE: Never work on or clean the range hood while power is ON. Always unplug
the unit or switch the electrical breaker to the off position.
NOTE: The baffle channels may already be in place. See Figure 1 for positioning.
To install filters, first install the removable baffle channel. Next, take the filter and put
one end into the permanent baffle channel. Push back into place and pull down,
sliding the bottom of the filter in. Position filters so that they rest on both lips of the
baffle channels. The edges of the baffle filters should have open slats on the outside
edges. Figure 2
WARNING: Edges on the baffle filters and baffle channels may be
sharp- please use caution when installing and removing. Do not attempt to
disassemble baffle filters, as the process may result in injury.
CHANGING PARTS
Figure 1 Figure 2
WARNING
Scan Me
Loading ...
Loading ...
Loading ...