Loading ...
Loading ...
Loading ...
1312
Designer Wall Hood Installation
Designer Wall Hood Installation
DESIGNER WALL HOOD INSTALLATION
The recommended height to install your hood is 30˝ minimum and 36˝ maximum
above the cooktop. For Outdoor (304 Series) hood installation, the unit must be
installed at a minimum of 36˝ and a maximum of 42” above the grill.
1. Find the center of the wall where you are installing the hood. Make sure there
is sufficient bracing, such as wooden beams, to hold the weight of the hood.
Mark your center line and measure out from the center to find your two mounting
points. Make sure your mounting points are level when you mark them. It is
recommended to install the hood directly into wood supports. Figure 1
2. Mark the mounting points and install the two mounting screws provided leaving
the heads out ¼˝ to mount the hood. Figure 1
3. Mount the main body of the hood to the two screws and screw into place. Figure
2
4. Mount the crown molding bracket, centering it above the hood. Figure 3
Figure 1
Figure 2
C
D
Figure 3
DESIGNER WALL HOOD INSTALLATION
5. Make your electrical and ducting connections. Try and minimize the use of
elbows. More elbows and longer runs create higher static pressure. The hood
comes with a grounded three prong plug that can be plugged into a 15 amp.
circuit. The cord is 36” long. Figure 5
6. Install the transition piece securing it with screws provided.
7. Connect the ducting to the transition piece using foil-backed tape to hold it into
place. Attach the ducting to the range hood.
Figure 4 Figure 5
Screw
Loading ...
Loading ...
Loading ...