Loading ...
Loading ...
Loading ...
6
31-49144
STEP 1 REMOVE THE EXISTING ICEMAKER
The icemaker will be attached to the
side wall of the freezer with a Phillips
head or Hex head screws.
Ŷ 8VLQJWKHDSSURSULDWHVFUHZGULYHU
loosen the mounting screws until
the screw heads extend about 1/2"
(13mm) from the freezer wall.
NOTE: Do not completely remove the screws.
Ŷ 6OLGHWKHLFHPDNHUXSZDUGVVRWKDWWKHVFUHZVDUHLQ
the wide part of the mounting tab. Pull the icemaker
away from the side wall of the freezer.
Ŷ 7RXQSOXJWKHLFHPDNHUORFDWHWKHUHVWUDLQWVRQ
HDFKVLGHRIWKHSOXJ8QFOLSWKHUHVWUDLQWVE\SXOOLQJ
outward.
Ŷ 8QSOXJWKHLFHPDNHUIURPWKHVRFNHWORFDWHGRQWKH
back or side wall of the freezer.
Ŷ 'LVFDUGROGLFHPDNHU
Installation
Instructions
Bracket Mount Instructions
WR30X10061 & WR30X10062
USE THESE INSTRUCTIONS FOR TOP-FREEZER
REFRIGERATORS ONLY
These instructions apply to top-freezer refrigerators
only. For metal interior lined side-by-side refrigerators
refer to page 2. For plastic interior lined side-by-side
refrigerators refer to page 4.
Phillips Hex
Head Head
Mounting
Screws
Mounting
Tabs
0D\5HTXLUHD)ODWEODGH
6FUHZGULYHUWR8QFOLS
5HVWUDLQWVRQ%DFN6LGH
8QFOLS
5HVWUDLQWVE\
Pulling Them
Outward
Hook
8QSOXJ
Loading ...
Loading ...