Loading ...
Loading ...
Loading ...
L_J
There is no rinse aid in the Check the dispenser and add rinse aid.
dispenser. Use a liquid type rinse aid.
The temperature of the water Connect the water supply line to a hot water
is low when the dishwasher is supply.
running. Use rinse aid with the Sanitize option.
Doe s not dry Too many dishes have been Proper loading of items can affect drying.
dishes well. loaded. Load your dishes as recommended.
(See page 17.)
Glasses and cups with
concave bottoms hold water.
This water may spill onto other
items when unloading.
Water was left over from an
incomplete cycle.
The Drain Hose is obstructed.
Has a bad odor.
The dishwasher is not used
daily or soiled dishes are left in
unit too long.
Sound is generated when the
dispenser cover is open and
the drain pump is operating in
an early stage.
The dishwasher is not level.
Is too noisy. Foreign material (a screw, a
plastic piece) is in the pump
chamber.
There is a 'chopping' sound
because a nozzle is bumping
against the dishes.
The nozzle hole is clogged
DOes not have a with food particles.
smoothly rotating The nozzle is blocked by a
nozzle: dish or pot and cannot rotate.
Water won,t The drain is clogged.
pump out of the
dishwasher.
Has a bent upper The dishes are not loaded
rack after loading properly.
dishes.
After finishing the cycle, empty the lower rack
first and then the upper rack. This will prevent
water dripping from the upper rack onto the
dishes in the lower rack.
Insert detergent without loading dishes, and run
the Normal cycle to clean the dishwasher.
Contact a qualified service technician to remove
any obstruction from the drain hose.
With the dishwasher empty and no detergent,
place a glass with 8 ounces of vinegar upright
into the lower rack, and then run a Normal cycle.
This is normal operation.
Ensure the dishwasher is level.
Contact a qualified service technician to remove
foreign material from the pump chamber.
Rearrange the dishes.
Clean the nozzle hole.
See pages 24 and 26.
After placing the dishes into the racks, rotate the
nozzles by hand to check whether any of the
dishes interfere with them.
Contact a qualified service technician to remove
any obstruction from the drain hose and drain
hole inside the sump. After that check the drain
pump operation.
Load your dishes as recommended.
(See page 17.)
English ° 30
Loading ...
Loading ...
Loading ...