Loading ...
Loading ...
Loading ...
Servicing Your Honda
155
Front Final Gear Oil
Refer to Safety Precautions on page 115.
Change the oil with the front final gear at normal operating
temperature to assure complete and rapid draining.
1.
Park the Honda SXS on a firm, level surface. Shift the shift select
lever into the park (P) position.
2.
Place an oil drain pan under the oil drain plug.
3.
Remove the oil fill cap, O-ring, drain plug, and sealing washer.
4.
After the oil has completely drained, reinstall the drain plug with
a new sealing washer and tighten it to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
5.
Fill the front final gear with the recommended oil.
13.4 US oz (395 cm
3
)
6.Make sure the oil level is at the lower edge of the oil fill inspection hole.
7.
Apply a thin coat of grease to a new O-ring and insert it into the
oil fill cap groove.
8.
Install and tighten oil fill cap to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
9.
Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 221).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
Changing Oil
LEFT FRONT
lower edge of oil
fill inspection hole
oil fill cap/O-ring
oil drain plug
sealing washer
Loading ...
Loading ...
Loading ...