Loading ...
Loading ...
Loading ...
DRIVING
Stopping the engine
Preferably allow the engine to idle for a minute
(always min 15 sec) to obtain normal working
temperature before stopping it, if it has been
working hard.
1. Lift up the cutting unit by pulling the lever back
to the end position.
2. Pull back the throttle control and turn the ignition
key to the STOP position.
3. When the Rider is at a standstill, press down the
parking brake and push in the locking button.
6017-002
Release lever
The release control must be pulled out in order for
the Rider to be moved when the engine is shutoff.
6007_217H
22 - English
Loading ...
Loading ...
Loading ...