Craftsman 917377961 rotary lawn mower

User Manual - Page 4

For 917377961.

PDF File Manual, 30 pages, Download pdf file

Loading ...
Loading ...
Loading ...
'are not
shipped with your mower.They are alsoavailableat mostSearsretailoutletsand service
centers. MostSearsstorescanalsoorderrepairpartsforyou,whenyou providethe model
numberofyourlawnmower. Some ofthese accessoriesmaynotapplyto yourlawnmower.
LAWN MOWER PERFORMANCE
CUPPING DEFLECTOR
FOR REAR DISCHARGE LAWN MOWERS
GRASS CATCHERS
FOR
REAR DISCHARGE
LAWN MOWERS
LAWN MOWER MAINTENANCE
MULCHER KITS
! eRASSCATCHERS
FOR
_( SIDE DISCHARGE
LAWN MOWERS
STABILIZER
C_S CANS
SPARK PLUGS
ENGINE OIL
Read these instructionsand this manual in
its entirety before you attempt to assemble
or operate your new lawn mower.
IMPORTANT: This lawn mower is shipped
WITHOUT OIL OR GASOLINE in the
engine.
Your new lawn mower has been as-
sembled at the factory with the exception
of those parts left unassembled for
shipping purposes. To ensure safe and
proper operation of your lawn mower, all
parts and hardware you assemble must be
tightened securely. Use the correct tools
as necessary to ensure proper tightness.
All parts such as nuts, washers, bolts,etc.,
necessary to complete the assembly have
been placed in the parts bag.
TO REMOVE LAWN MOWER FROM
CARTON
Remove loose parts included with
mower.
Cut down two end corners of carton and
lay end panel down flat.
Remove all packing materials except
padding between upper and lower
handle and padding holding operator
presence control bar to upper handle.
Roll lawn mower out of carton and check
carton thoroughly for additional loose
parts.
4
HOW TO SET UP YOUR LAWN
MOWER
TO UNFOLD HANDLE
IMPORTANT: Unfold handle carefully so
as not to pinch or damage control cables.
Raise lower handle sectionto operating
position and squeeze the bottom ends of
lower handle towards each other until
the pin in handle can be inserted into
one of the three height adjustment
holes.
Remove protective padding, raise upper
handle section into place on lower
handle and tighten both handle knobs.
Remove any packing material from
around control bar.
Loading ...
Loading ...
Loading ...