Loading ...
Loading ...
Loading ...
Cartridge Reassembly
You can now install your new cartridge. Push the
cartridge straight into the valve, making sure that the ears
of the cartridge are lined up precisely with the clear tabs
filling the front and back center openings of the valve
body, or 12:00 and 6:00.
To reinstall the cartridge into your faucet assembly,
reverse the steps that you followed to remove the old
cartridge. Replace the retaining clip and reinstall the
washer and the limit stop onto the top of the cartridge.
Replace the collar(s), you would have had 1 or 2
depending on the version of your faucet.
When reattaching the handle, make sure to hook the back
of the adapter into the groove of the pivot retainer.
Using a Philips head screwdriver, screw the handle
adapter onto the cartridge stem. Push the handle down
onto the faucet housing, and re-secure with the hex key.
Go to step 8 if you want to reverse the Hot and Cold
sides.
Disassembly
To remove the cartridge from your faucet assembly, first
use a hex wrench to loosen and remove the screw from
underneath the handle. Then, pull the handle out away
from the wall and unscrew the handle adapter and remove
it.
Loading ...
Loading ...
Loading ...