Loading ...
Loading ...
Cartridge Removal
You are now ready to remove the old cartridge. Insert the
white plastic tool, which is included in your kit, onto the
cartridge stem so that it straddles the ears. Use pliers on
the white plastic tool and loosen the cartridge by twisting
1/4 turn each direction one at a time. After removing the
white plastic tool, grasp the cartridge stem and pull it
straight out of the valve (using pliers or an adjustable
wrench).
Cartridge Reassembly
You can now install your new cartridge. Push the
cartridge straight into the valve, making sure that the ears
of the cartridge are lined up precisely with the retaining
clip notch with the clear tabs filling the front and back
center openings of the valve body, or 12:00 and 6:00.
Reinstall the clip and replace the washer onto the
cartridge. Then replace the stop tube, and replace and
secure the handle. Finally, snap the handle cover into
place. Go to step 8 if you want to reverse the Hot and
Cold sides.
Disassembly
To remove the cartridge from your faucet assembly, first
use a hex wrench to loosen and remove the screw from
the front of the handle. Then, pull the handle off from the
faucet.
Loading ...
Loading ...
Loading ...