Loading ...
Loading ...
Loading ...
15
Setting Surface Controls
Home Canning
Be sure to read and observe all the following points when home
canning with your appliance. Check with the USDA (United
States Department of Agriculture) Web site and be sure to read
all the information they have available as well as follow their
recommendations for home canning procedures.
• Use only a completely flat bottom canner with no ridges
that radiate from the bottom center when home canning.
Heat is spread more evenly when the bottom surface is flat.
Use a straight-edge to check canner bottom.
• Make sure the diameter of the canner does not exceed 1
inch beyond the surface element markings or burner.
• It is recommended to use smaller diameter canners on
electric coil and ceramic glass cooktops and to center
canners on the burner grates.
• Start with hot tap water to bring water to boil more quickly.
• Use the highest heat setting when first bringing the water to
a boil. Once boiling is achieved, reduce heat to lowest
possible setting to maintain that boil.
• NEVER place or extend a cooking utensil over 2 different
cooking areas at the same time. This will cause the heating
to be uneven and could break the ceramic cover.
• Do not leave water bath or pressure canners on high heat
for an extended amount of time.
Loading ...
Loading ...
Loading ...