Summit ADRD18PNR 18" Wide 2-Drawer All-Refrigerator, ADA Compliant (Panels Not Included)

User Manual - Page 13

For ADRD18PNR.

PDF File Manual, 14 pages, Read Online | Download pdf file

ADRD18PNR photo
Loading ...
Loading ...
Loading ...
13
TROUBLESHOOTING
You can solve many common problems easily, saving you the cost of a possible service call. Try the
suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM
POSSIBLE CAUSE
REMEDY
Appliance does
not operate.
The appliance defrosts automatically in
normal operating conditions.
The appliance is turned off.
Tripped circuit breaker or a blown fuse.
Connect the appliance.
Switch on the appliance.
Switch on the circuit breaker or
replace the fuse.
Appliance is not
cold enough.
The temperature is not set correctly.
The ambient temperature could require
a lower temperature setting.
The condenser is too dirty.
The ventilation opening is blocked or
too dusty.
Check the set temperature.
Set a lower temperature.
Clean the condenser when
necessary.
Clear the obstructions and wipe off
the dust.
Appliance turns
itself on and
off frequently.
The room temperature is higher than
average.
A large number of bottles has been
added to the appliance.
Put the appliance in a cooler place.
Leave the appliance to work for a
while until the set temperature has
been reached.
The light does
not work.
Appliance is not connected to a power
supply.
Tripped circuit breaker or a blown fuse.
The light was switched off on the
control panel.
Connect the appliance.
Switch on the circuit breaker or
replace the fuse.
Switch on the light.
Vibrations
The appliance is not properly level.
Level the appliance with the
adjustable feet.
The appliance
seems to
make too
much noise.
The rattling noise may come from the flow of the refrigerant, which is normal. As
each cycle ends, you may hear gurgling sounds caused by the flow of
refrigerant in your appliance.
If temperature fluctuations occur, the contraction and expansion of the inner
walls may cause popping and crackling noises.
The appliance is not properly level.
Level the appliance with the
adjustable feet.
Display “E1”,
“E2”.
“E1” or “E2” indicates that the air
temperature sensor has failed.
Call for service.
If you've checked the table above and find that you still need help with your appliance, call our
Customer Service facility at 800-932-4267 between 9:00AM and 5:00PM ET. We will do our best to
answer your questions.
Loading ...