Loading ...
Loading ...
Loading ...
10
To Select Operating Mode:
To choose the operating mode, press the “Mode” button. Each time you press the button a mode
is selected in a sequence that cycles from Auto -> Cool -> Energy Saver -> Fan Only -> Dry. The
indicator light beside the mode button will be illuminated and remain on once the mode is
selected.
To Operate in Auto Mode:
• When you set the unit to “Auto” mode the unit will automatically select cooling or fan
only operation: Whichever will reach and maintain the default cooling temperature
setting of 66°F.
• When the ambient room temperature is above 66°F, the unit will turn on the compressor
to begin cooling. Once this temperature is achieved, the unit will then switch to fan only
mode in order to maintain this temperate. This process will repeat, as necessary.
• In this mode, the set temperature cannot be adjusted. It will start automatically at a
speed calibrated to the actual room temperature.
To Operate in Cool Mode:
• When the unit is set to “Cool” mode it will cool the room to maintain the desired set
temperature.
• When the desired temperature has been reached, the unit will automatically maintain the
temperature.
• Press the Up and Down buttons to adjust the desired temperature and press the Fan
Speed button to adjust the fan speed.
To Operate in Energy Saver Mode:
• In this mode, the air conditioner will attempt to save energy by cooling less frequently
while still trying to maintain the desired set temperature.
• The Fan Speed can still be adjusted.
To Operate in Fan Only Mode:
• Use this function only when cooling is not desired, such as for room circulation or to
exhaust air. You can choose any speed you prefer, though the “Auto” fan speed is not
an available option.
• In Fan Only mode, you cannot adjust the set temperature.
To Operate in Dry Mode:
• In this mode, the air conditioner will operate as a dehumidifier. Because the conditioned
space is closed or sealed, some degree of cooling will continue to occur.
• The air conditioner runs at the Low fan speed, which cannot be adjusted.
Note:
• The unit does not constantly take temperature readings. The unit will take a temperature
reading periodically while operating in AUTO mode, or immediately upon adjustment of the
desired set temperature.
• When operating in AUTO MODE the unit may not switch between Cool and Fan Mode at the
exact moment when a temperature change has occurred.
• Room temperature may be different than the temperature sensed in front of the air conditioner.
Loading ...
Loading ...
Loading ...