Loading ...
Loading ...
Loading ...
6
6. TROUBLESHOOTING
If there is any trouble when machine works, please make sure the following steps are
taken:
TROUBLE REASONS MEASURES
The machine doesn’t work
or work with low speed.
- The electrical outlet doesn’t
connect well.
- The wire drops.
- The voltage is not steady.
- Confirm the connecon
of the electrical outlet.
- Confirm if every part is
connected well, or if the
wire drops.
- Keep the voltage steady.
The effect of the Slicing is
not good.
- The me of thawing is so
short that the frozen meat
is too hard.
- The blade is not sharp enough.
- The meat supplying device
is not lubricated enough.
- The meat-nipping device
nips the meat too hard.
- Refer to the introducon
of the meat slicing.
- Refer to Sharpening the
blade.
- Fill in small amount of
lubricant in the blade pole,
but rap oil and bean of oil
are not allowed. It is beer
to clean the device with
dissolved liquid.
The speed of the
blade is slow
when it works.
- The wheel belt is loose.
- Lie down the machine and
then strain the adjusng
pole beside the motor.
11
8. ELECTRICAL DIAGRAM
ST - Temperature limiter in motor
SB1 - Close switch
SB2 - Open switch
KM - Relay
HL - Work indicator
M - Motor
C - Starng capacitor of motor
Loading ...
Loading ...