Loading ...
Loading ...
Loading ...
ROBLEM SOLUTION
Shuts off before load is dry • The dl'yer load is too small. Add more items or a few towels and
Lint on clothes
Garments still wrl nkled after
Wrinkle Release
Odors remain in clothing
after Air Fluff.
restart the cycle.
The dryer load is too large. Remove some items and restart the dryer.
Make sure the lint filter is cleaned before every load. With some loads
that produce high amounts of lint, it may be necessary to clean the
filter during the cycle.
Some fabrics are lint producers (for example, a fuzzy white cotton
towel) and they should be dried separately from clothes that are lint
trappers (for example, a pair of black linen pants).
Divide larger loads into smaller loads for drying.
Check pockets thoroughly before washing and drying clothes.
Small loads of 1 to 4 items work best.
Load fewer garments. Load similar-type garments.
Fabrics containing strong odors should be washed in a normal cycle.
INFORMATION CODES
If an information code occurs, first all 8 LEDs turn ON and next the corresponding LED will be blinked while
it happens.
DO
AC
BC2
TO2
DF
HC
901
FC
O
O
O
O
O O
Clean the screen or vent.
TO If the problem continues, call for service.
HC Call for service.
Close the door and then restart.
If the problem continues, call for service.
Try restarting the cycle.
If the problem continues, call for service.
Call for service.
9Cl
BC2
The thermistor resistance is very low
or high.
Invalid heating Temp in running the
dryer).
Running the dryer with door open.
Invalid power source Frequency.
Electronic Control Problem
(Invalid Voltage).
Electronic Control Problem
(Invalid Communication).
Invalid door.
Electronic Control Problem
(Button Key Input Check).
Call for service.
Call for service.
Call for service.
For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG).
Engl sh - 28
D\_3000] D\_40]3000E\\_ USER.\IANUAL DC68 03170N ENindd 28 2014/12/30 15:14:49
Loading ...
Loading ...
Loading ...