Loading ...
Loading ...
Loading ...
5
6
a
$
$
ts
be
gh
$
2
$
>
$
((Childproof lock)
Programme cannot be changed by accidental operation.
To activate the childproof lock:
After the programme starts, press and hold the ( button for 5 seconds;
Release when the ( symbol lights up.
When the programme ends, the Start/Reload $ indicator remains on to remind you to
deactivate the childproof lock.
*
( symbol flashes if the programme has been changed while childproof lock is activated.
To deactivate the childproof lock:
Touch and hold the ( button until the ( symbol turns off;
Release the button.
If the childproof lock is deactivated while the programme selector is in a different position
from when the childproof lock was activated*, the current programme will be halted.
ʑ
Additional functions
See also Programme overview apage 7
Ĉ SpeedPerfect
For washing in a shorter time with a washing result
comparable to that of the standard programme.
ć EcoPerfect
For saving energy with a washing performance
comparable to that of the standard programme.
2Extra Rinse
Additional rinse cycle. Prolonged programme duration.
For areas with very soft water or for further improving the
washing result.
7 Prewash
Activate prewash. For heavily soiled, hard-wearing
textiles, e.g. made of cotton or linen.
The additional function indicator light is on when this option is selected; if this option cannot
be selected for the programme, this is indicated by a short flashing of the light and an
acoustic signal.
ʑ
$Start/Reload
To start or pause the programme.
ʑ
Signals
Set to ÂPress and
hold
1 step
clockwise
Button signals Information signals
Set volume* Set volume*1 step
clockwise
Set to
Â
1. Start signal mode
2. Set volume for ...
Release
#
*If required, set repeatedly
1 step
clockwise
direct
a
a
L
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
L
Lć
a
~
ʋ
ʋ
ʋ
ʑ
Display symbols
ʑ
Display information
Before starting a programme, the max. load
for the selected programme is displayed
when the door is open. The remaining time
or finish-in time is displayed when the door
is closed.
*Display shown may vary depending on the
model and selected programme.
ʑ
Option buttons
You can change the spin speed and temperature beforehand and while the selected programme is running. The effects
depend on the progress of the programme.
°C (Temp.)
You can change the indicated washing temperature. The maximum washing temperature that can be selected
depends on the programme that has been selected.
(Finish in)
When you select a programme, the respective programme duration is displayed. You can delay the start of the
programme before it begins. The finish-in time indicates when the programme will be finished. It can be set in hourly
increments up to a maximum of 24 hours. Press and hold the (Finish-in) button until the required number of hours
is shown (h=hour). Select Start/Reload$.
(Spin speed)
You can change the indicated spin speed. The maximum spin speed which can be selected depends on the selected
programme. If is selected, the load is held in the rinsing water.
1Wash: On if wash process is running.
Rinse: On if rinse process is running.
Spin: On if spin process is active
if the symbol cflashes
apage 10
+Water tap: Flashing if tap not open or no water supply.
Door: On if door can be opened.
Overdosage: On if too much detergent used.
Automatic load detection: Automatically detects the
load size after the water inlet phase and sets the accurate remaining
time. Symbols indicate small, medium and full loads measured*
according to the recommended max. load for the selected
programme.
* Automatic display of the detected load only for washing
programmes with a max. load recommendation > 3.0 kg except for
Rinse, Spin and Drain. Different types of textiles with different water
absorption rates may influence the load display.
kg, e.g. kg*: max. recommended load for selected programme
apage 7, Programme overview
time, e.g.
*: remaining time
*: finish-in time defined by user apage 5
: pause
: door can be opened in Pause status
: end of programme
: end of programme with the setting
: set volume of signals apage 6
: Information on the display apage 10
>
$
ng.
Â
a
L
I
1
ߣ
:O
.
>
2
K
$
E
ā
~
Display information, Options, Functions Options, Functions
$
(
a
a
a
LD
Ĉć2
7
āD
E
D
Ĉć2
7
I
D
Ĉć2
7
1
D
Ĉć2
7
D
$
:O
D
Ĉ2
.
D
D
Ĉ
22
>
7
Ĉ
Loading ...
Loading ...
Loading ...