Loading ...
Loading ...
Loading ...
Maintenance
1. Always turn OFF the heater and
disconnect the cord from the
electrical outlet before cleaning
your heater.
2. Light accumulated dust may be
removed from the heater with a
soft cloth or vacuum cleaner.
3. Wipe the exterior surfaces of the
heater occasionally with a damp
cloth (not dripping wet), using a
solution of mild detergent and
water. Dry the case thoroughly
before operating the heater.
Caution: Do not allow water to run
into the interior of the heater
as this could create a fire or
electric shock hazard.
4. The fan motor is factory lubricated
for life and will require no further
lubrication.
5.
Store heater in a clean dry place
when not in use.
Cleaning the electrostatic
filter:
The heater has an electrostatic filter
located in the rear of the heater. The
cleaning of the filter should be
performed once per month or as
needed (when dust is visible on the
filter) to ensure efficient operations of
the heater.
1. Power the heater off .
2. Unplug the heater’s power cord.
3. Remove the filter
4. Clean filter by vacuuming filter
clean.
Warning:
Any other servicing
needed must be performed by an
authorized service representative. Do
not attempt to service the unit
yourself.
Product Specifications
Model#: DR-838
Voltage: 120V, 60Hz
Current: Maximum continuous
draw: 12.5 amps;
Output: 5200 BTUs
Power: 1500 Watts
Turbo Fan: Multi blade; Low
Noise
Loading ...
Loading ...