Loading ...
Loading ...
Loading ...
User instructions
22
Do not use table salt as it contains insoluble substances which, over
time, may damage the water softening system.
When necessary, refill the regenerating salt container before
starting the washing program. In this way, the excess saline
solution will be immediately removed by the water; the prolonged
presence of salt water inside the tank may lead to corrosion.
Be careful not to confuse the salt and detergent packages; adding
detergent to the salt container will damage the water softening system.
ADJUSTING THE WATER SOFTENING SYSTEM
(on some models only)
The setting can be adjusted using the PROGRAM SELECTION
BUTTON (7). Keep the button pressed until the WATER HARDNESS
ADJUSTMENT INDICATOR LIGHT (5) flashes. The SELECTED
PROGRAM INDICATOR LIGHTS (8) indicate the current setting. Each
press of the button modifies the setting according to the sequence in the
following table:
>
After carrying out the adjustment or displaying the current setting, if you
do not touch the button for a few seconds the dishwasher will
automatically exit from adjustment mode and return to the standard
operating mode.
Loading ...
Loading ...
Loading ...