Loading ...
Loading ...
Loading ...
29
To remove the control panel:
1. Turn the control knobs to the OFF position and turn off the gas supply to the unit.
2. Remove the drip tray .
3. Pull the control knobs from the stems and set aside .
4. Using a Phillips screwdriver, unscrew and remove the control panel fastener screws and washers
(located on the left and right front face of the control panel). Retain the screws for later re-installation .
5. Carefully open the control panel by lifting and pulling the control panel from the frame , allowing it to
rest on the internal chain(s).
Important: During reinstallation; prior to opening the gas shutoff valve , be sure the control knobs are
in the OFF position.
CONTROL PANEL REMOVAL
Loading ...
Loading ...
Loading ...