Loading ...
Loading ...
Loading ...
9 Attach each Frame, curtain the window sash
using screws _171_,(TypeC). (Fig. 6)
CAUTION: Do not drill a hole in the
bottom pan. The unit is designed to
operate with approximately i/2" of water in
bottom pan.
10. Slide the unit into the cabinet. (Fig. 7)
CAUTION: For _urity purpose,
reinstall screws (Ty_ A) at cabin_'s, sides.
11. Cut the foam-strip ,::8,to the proper length
and insert between the upper window sash
and the lower window sash. (Fig. 8)
Screw(Type A)
Screw(Type A)
Foam-Strip _
12. Attach the window locking bracket ® with
a _pe C screw. (Fig. 9)
13. A_ach the front grille to the cabinet by
inserting the tabs on the grille into the tabs
on the front of the cabineL Push the grille
in until it snaps into place. (Fig.10)
Win_w I_kJng bracket@
14. Li_ the inlet grille and secure it with a _pe
A screw through the front grille. (Fig. 1 1) Fig. 10
15. Window installation of room air conditioner
is now completed, See ELECTRICAL DATA
for _taching power cord to electrical outlet,
Fig. 11
Loading ...
Loading ...
Loading ...