Loading ...
Loading ...
Loading ...
10K Series Models
[] How to Instafl the Unit
4,
TO prevent vibration and noise, make sure
the unit is installed securely and firmly
2. Install the unit where the sunlight does not Cooled
shine directly on the unit.
, The outside of the cabinet must extend
outward for at least 11" and there should
be no obstacles, such as a fence or wall,
within 20" from the back of the cabinet
because it will prevent heat radiation of the
condenser.
Restriction of outside air will greatly reduce
the cooling efficiency of the air conditioner,
Fence
/
/
CAUTION: All side louvers of the cabinet must remain ex_s_ to the outside
of the structure.
4. Install the unit a little slanted so the back is slightiy lower than the front(about 1/2).
This will force condensed water to flow to the outside.
5. Install the unit with the bosom about 30"*_60 '' above the floor level.
[] Window Requirements(SK, 1OK Ser_s)
All supporting parts should be secured to fi_ wood, masonry, or metal.
This unit is designed for installation in
standard double hung windows with actual
opening widths from 22" to 36".
The top and bosom window sash must open
sufficiently to allow a clear vertical opening of
15" from the bottom of the upper sash to the
window stool.
15" min
Interior wall
18 1/2" min.
(Withoutframecurtai#)
Loading ...
Loading ...
Loading ...