Loading ...
Loading ...
Loading ...
26
INSTRUCTIONS (Cont.)
STARTING THE DISHWASHER
• Open the dishwasher and draw out the lower and upper basket and load in the
dishes. Push them back in.
• When you finished loading the dishes, open up the detergent dispenser and
add in your detergent. Refer to pages 23 & 24 for more information of adding
detergent and Rinse aid dispensers.
• Once you have added your detergent and loaded the dishwasher. Close the
door and be sure that it clicks in so that its closed correctly. Press the ON/OFF
button on the dishwasher panel.
• Press the PROGRAM button repeatedely and select the desired wash program.
Refer to page 13 for wash programs.
• Press the START/PAUSE button to start the program. When the program
has completed washing your dishes. Press the ON/OFF button to turn off
the dishwasher.
FORGOT TO ADD A DISH
A forgotten dish can be added at any time before the detergent cup opens.
• Press the START/PAUSE button to stop the washing.
• When the spray arms stop spinning, open the door a little bit, best to add dishes
in on upper basket. (opening the door all the way will cause water to leak as you
are pausing mid-wash).
• Add in your forgotten dish
• Close the door and press START/PAUSE button. The dishwasher will continue
to run after 10 seconds.
AT THE END OF A WASH CYCLE
When the program wash cycle has finished, the buzzer on the dishwasher will sound for
8 seconds, then stop. Press the ON/OFF button to turn off the
dishwasher before accessing the dishwasher.
• Wait a few minutes before opening the dishwasher to avoid scalding hot dishes
and utensils as they will still be hot from the washing cycle you just completed.
• Open the door carefully a little bit and let the dishes cool before removing the
dishes, this way the dishes will be cool when removing and will dry better.
• Empty the lower basket first to avoid dripping water from the top basket
down onto the dishes on the bottom.
Loading ...
Loading ...
Loading ...