Loading ...
Loading ...
Loading ...
AugerShaft
At least once a season, remove the shear pins from the auger
shaft. Spray lubricant inside the shaft and around the spacers
and the flange bearings found at either end of the shaft.
See Fig. 6-3.
I __ o
I............. S
k. j
Figure 6-3
Adjustments
ChuteBracketAdjustment
If the spiral atthe bottom of the chute directional control is not
fully engaging with the chute assembly, the chute bracket can be
adjusted. To do so:
1. Loosen the two nuts which secure the chute bracket and
reposition it slightly. See Fig. 6-4.
j
Figure 6-4
Retighten the nuts.
AugerControl
Refer to the Assembly and Set-up section for instructions on
adjusting the auger control cable.
ChuteAssembly
Refer to the Assembly and Set-up section for instructions on
adjusting the skid shoes chute assembly.
SkidShoes
Refer to the Assembly and Set-up section for instructions on
adjusting the skid shoes.
'°1
SECTION 6-- MAINTENANCE & ADJUSTMENTS
Loading ...
Loading ...
Loading ...