Loading ...
Loading ...
Loading ...
8
Headline
Surface Operation
Induction Cooktop Operation
To turn the unit on, press the main power button on the far right side. Once the power is on, you can turn on the
individual elements by pressing the power button associated with the element. Touch the power slide and move
nger to increase or decrease power setting. The power of the cooking elements can be set in 9 steps and is
displayed by the numbers “1” to “9” in the LED display above the slide.
The highest setting is “P” representing the power booster setting which allows for very fast heat up times. It is
recommended to use this function for boiling water or other liquids. Only 2 elements can be used on the power
booster setting at one time. Attempting to use more than 2 elements could result in automatic reduction of
power on other elements.
Key Lock - Activating the Key lock button locks the keys and the Key Lock LED will remain lit. The controls
continue to work in the previously set modes but can not be changed. Only the Key lock button itself and main
power button can still be activated. Pressing the Key Lock button again until the LED goes out, deactivates the
function.
Timer Function - There are two timer functions, stand alone and cooking element timer. The stand alone timer
is used when no cooking element is activated. Press and hold both the Up and Down button to initate the
timer. Set the timer using the Up and Down buttons. When the cooking element timer is activated, a beep will
be heard and a clock will appear above the element slide of the burner in use. Increase
or decrease the time desired. The timer can be set up to 9 mins 59 secs. Once the timer
reaches 10 minutes the display will change to hours.mins. Up to four cooking elements can be
freely programmed. To view the di erent timer, press the UP and Down at same time to scroll
between the di erent elements being timed.
When time has expired on the cooking element timer, a beep will be heard. If not canceled, the beep will
continue for 10 mins. To cancel the beep, press the Up or Down button on the timer. If the cooking timer has
expired, the stand alone timer will continue to run as long as time remains. To cancel the timer, press and hold
the UP and Down button to initiate the timer. Using the down button, set timer to 0.00.
Pause Function - When activated, all functions of the cooktop are stopped. The digital display will ash
above each element slide control. To cancel the pause function, press the pause button. A scrollling light will
appear above the far right scale. Slide your nger along the scale to cancel the pause function. All functions will
return to previous setting. Pause function has a maximum time limit of 10 minutes. If the pause function is not
removed before the time limit, the cooktop will shuto . There is a 6 second time delay between turning the main
power on and activating the pause function.
Other LED displays
Pot Detection - If cookware is detected, the “suspended pot” symbol is shown on the display. Once detected, the
power setting can be selected. If the pot is not detected, this symbol will ash and the power setting can not be
set.
Residual Heat Display - After turning o the power levels, the residual heat on the cooking element is displayed
as long as the temperture of the glass is over 149
0
F (65
0
C)
Child Lock - Turn the main power on, all cooking elements must be OFF.
8
8
8
8
8
NOTICE
When touching the controls, you must touch and hold for a few
seconds. Controls will not function properly if you just tap and release.
8
8
8
Timer Display
Mins.Secs
To activate child lock: Press key lock and Pause simultaneously. Release and press key lock again. “L”
will be displayed on timer and above each control indicating the unit is locked.
To unlock child lock: Press key lock and Pause simultaneously. (this unlocks the unit for cooking
operations, but child lock will resume if the unit is powered o and then back on)
To disable the child lock: Press key lock and Pause simultaneously. Release and press pause again.
(this will disable the child lock until it is activated following the steps listed above)
Loading ...
Loading ...
Loading ...