Loading ...
Loading ...
Loading ...
Cleaning and care
38
Refit the grease filters, making sure
that the latch faces outwards.
If a grease filter is inadvertently fitted
upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Swing the panel closed until the
magnets hold it in place.
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be reset.
With the fan switched on, press the
grease filter control for approx.
3seconds, until only 1 is flashing.
The grease filter symbol goes out.
Charcoal filters
With recirculation mode, two charcoal
filters must be fitted in addition to the
grease filters. These are designed to
absorb cooking odours.
Charcoal filters are available to order via
the Miele Webshop, the Miele Spare
Parts Department (see end of this
booklet for contact details) or from your
Miele dealer.
The type of charcoal filter required is
listed under “Technical data” at the
back of this booklet.
Fitting/replacing charcoal filters
Remove the panel and remove the
drip tray as previously described.
Take the charcoal filters out of their
packaging.
Insert the charcoal filters into the
deflector plate. Make sure the tabs
are facing up.
Refit the drip tray and the panel.
When to change the charcoal filters
Replace the charcoal filters when they
no longer absorb kitchen odours
effectively, and at least every 6months.
The operating hours counter will remind
you to replace the charcoal filters by
lighting up the charcoal filter symbol .
Resetting the charcoal filter
operating hours counter
After changing the charcoal filters, the
operating hours counter needs to be
reset.
With the fan switched on, press the
charcoal filter control for approx.
3seconds, until only 1 is flashing.
The charcoal filter symbol will go
out.
Disposing of charcoal filters
Used charcoal filters can be disposed
of with normal household waste.
Loading ...
Loading ...
Loading ...