Loading ...
Loading ...
Loading ...
Accessories/O tions
_ Setting-up
I Television unit I
...........
* Carry out work on
IIIII I_J :L L _ .U:I ahorizontaland
I1[Uo-___--_1 levelsun'ace
Rear
Label I Pedestal ]
Lift the television unit above the pedestal base,
with the back of the display unit on the same side
as the Label. Then align the holes in the television
unit with the poles of the pedestal and lower the
television unit into place.
Use the assembly screws _13}(MS x 30) to fasten
securely.
Stopping the plasma television from falling over
* The plasma TV must be fastened to both the base and the wall.
Accessories for pedestal security
, Band (2) _2_,Screw (2)
Nominal diameter
4mmx12
,_3}Wood screw (2) ,F4_Clamp (2)
=, S
J
MSecuring to a base MSecuring to a wall
Front __
Front
Fasten with wood screws in the holes in the
back edge of the wood worktop. If there are
no holes, first drill them in the middle of the
thickness of the wood worktop, and then
fasten the strap with wood screws.
Screws on main body
f
Securing method /
J
J
* Remove the screws at
both top corners on
the rear side of the
plasma TV, and attach
the clamps _4_to the
plasma TV using the
removed screws.
* Use strong wire
or chain which is
commercially available
to secure the plasma
television to a solid
area of the wall or a
pillar.
8
Loading ...
Loading ...
Loading ...