Loading ...
Loading ...
Loading ...
Westinghouse Outdoor Power Equipment, LLC | 9
ASSEMBLY
INSTALL UPPER GUN HOLDER
From the front of the unit, remove top-right bolt, washers,
and nut� Reinstall with the upper spray gun holder� From
the rear of the unit, install the push rivet as shown�
INSERT SPRAY NOZZLES
Insert the colored nozzles into the corresponding holders
on the top of the pressure washer�
ASSEMBLE SPRAY GUN AND HOSE
1. Install the spray lance on the spray gun� Tighten the
spray gun collar hand-tight� DO NOT over-tighten�
2. Install the high-pressure hose and tighten the collar� DO
NOT over-tighten�
3. Engage the trigger lock in the safe position�
Note: The trigger lock prevents the spray gun from being
triggered accidentally� Push the lock fully up to
engage it�
4. Select desired nozzle for application� Pull back the
quick-connect collar at the end of the spray lance� Insert
the nozzle then release the collar� Pull on the nozzle to
make sure it is secured�
5. Mount the spray gun in the gun holders�
6. Connect the high-pressure hose to the high pressure
outlet on the pump� DO NOT over-tighten�
NOTICE
Be careful to avoid cross-threading, which can cause the
hose to leak during use�
Loading ...
Loading ...
Loading ...