Loading ...
Loading ...
Loading ...
15
CLEANING & MAINTENANCE
DRAINING THE UNIT
During the cooling process, some water will be extracted from the air and
stored within the unit's water reservoir.
If the reservoir is full, both the compressor and motor will stop and the unit will
beep (press any button to stop the beeping sound}. The full water tank
indicator light will also start flashing.
To resume cooling, empty the reservoir by following these steps:
1. Turn off the air conditioner and unplug it from the wall socket. To prevent
water leakage, avoid moving the unit when full.
2. Place a container (such as a small pan) underneath the drain hole.
3. Remove the drain knob & rubber plug from the drain hole and allow the
water to drain out.
4. When the container is almost full, replace the rubber plug in the drain hole
and empty the water tray.
5. Repeat until the unit is emptied.
6. Replace the rubber plug and make sure it is firmly in place.
7. Turn the unit back on. The full tank indicator light should turn off.
Loading ...
Loading ...
Loading ...