Loading ...
Loading ...
Loading ...
13
Setting Timer
1. Press the TIMER button to set the desired number of operating hours
(from 1 to 12 hours). When the set time has been reached, the machine
will turn off automatically. The display window will show the hour(s) you
set as you press the TIMER button. If the TIMER is not set, the unit will
work continuously.
2. By pressing the timer without turning on the other functions, you can PRE-
SET the number of hours to be delayed before the unit turns on. For
example, if you set the timer to "2", the unit will automatically turn on
after 2 hours.
Sleep Function
1. When in cooling mode, press the SLEEP button. The set temperature will
increase 1°F on the 1st hour; another 1°F on the second hour, and then
maintain that temperature.
2. When in heating mode, press the SLEEP button. The set temperature will
decrease 1°F on the 1st hour; another 1°F on the second hour, and then
maintain that temperature.
3. In the sleep mode, the fan will automatically be set to low. By pressing the
SLEEP button again, the set temperature and fan speed will revert back to
the previous setting.
4. The unit will shut down automatically after it has been in sleep mode for
12 hours.
5. Please note the sleep function is not available while the machine is
working in AUTO or FAN (ventilation) mode. It will only work in cooling
or heating mode.
Heating Function (For AC-101OOH Only)
1. When the air conditioner is in heating mode, ambient warm air is recycled
and used to heat your immediate area. The exhaust pipe will still need to
be fitted onto the unit in order for the cold air to be removed.
2. Continuous drain is compulsory while the unit is in heat mode. Working
range for heating function is 45 to 77°F (7 ~ 25°C). If the ambient
temperature is lower than this range, the unit may not work properly.
All the functions can also be performed with the supplied remote control. The
remote control requires 2 AAA batteries to operate.
Loading ...
Loading ...
Loading ...