Loading ...
Loading ...
Loading ...
6
INSTALLATION INSTRUCTIONS
Before Using your Refrigerator
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
o 3 shelves
o 1 crisper drawer with glass cover
o 1 handle with screws and handle seal
o 2 keys
• Before connecting the unit to the power source, let it stand for approximately 2 hours. This
will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
Installing the Refrigerator
• This appliance is designed to be free-standing only, and should not be recessed or built in.
• Place your unit on a floor that is strong enough to support the unit when it is fully loaded. To
level your unit, adjust the leveling legs at the bottom.
• Allow 5 inches of space between the back and sides of the unit, which will allow the proper
air circulation to cool the compressor and condenser.
• Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extremely cold ambient temperatures may also affect the unit's performance.
• Avoid locating the unit in moist areas.
• Plug the unit into an exclusive, properly installed and grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or
authorized service center.
• After plugging the appliance into a wall outlet, allow the unit to cool down for 2 to 3 hours
before placing items to be stored inside.
Loading ...
Loading ...
Loading ...