Loading ...
Loading ...
Loading ...
12
GETTING STARTED (Cont.)
CONNECTING THE WATER INLET HOSE
IMPORTANT! To prevent leakage or water damage please follow the below
instructions. Do not kink, crush, modify or sever the water inlet hose.
Minimum Inlet Water Pressure: 0.03MPa/Maximum Inlet Water Pressure: 1MPa
Be sure to only use new hose sets when connecting the washing machine. Do not re-use
old hoses.
INSTALL INLET PIPE
1. Connect the elbow to tap and fasten it clockwise.
2. Connect the other end of inlet pipe to the inlet valve at the backside of
washing machine and fasten the pipe tightly clockwise.
Notes: If there is any leakage with hose after connecting, then repeat the steps to
connect inlet pipe. The most common type of tap shall be used to supply water. If
the tap is square or too big, then the tap should be changed to a standard one.
PLACE OUTLET HOSE
There is 1 way to place the end of outlet hose:
• Put it beside the water trough.
Connect the other end of the inlet pipe to the inlet
valve on the back of the
appliance and fasten the pipe tightly clockwise.
Loading ...
Loading ...
Loading ...