Loading ...
Loading ...
Loading ...
31
NOTES:
1. When the cooktop is in Standby mode, and no button is pressed for one
minute, the cooktop will beep once, then automatically turn off.
2. The default power level setting is level 5.
3. The heat setting indicator of the selected zone will flash when the level is
being adjusted or set.
4. After adjusting, the heat setting number will flash for 5 seconds then stop
flashing. At this time, the setting will be confirmed.
To Turn Off the Cooktop
1. You can turn the cooking zone off by adjusting heat setting to level 0; the
indicator shows “- “
2. You can also turn the whole cooktop off by touching the ON/OFF
control button.
NOTES:
• If the power shuts off during cooking, all temperature settings will be
cancelled.
• The cooling fan of the induction cooktop will remain on for about 1 minute
after the cooktop is turned off.
Power Management
Model SINC2B115/LNC2B115 includes a power management function that will
limit total power to 1800W, even when both zones are in use. If you would like
to increase the power level of one burner and the total output is 1800W, the
cooktop will automatically reduce the power level of the other element as you
adjust.
Using the Knob Control Models
To Start Cooking
After the cooktop is connected to a power source, push the knob down and
turn the knob in either direction to the setting you want. When the knob is in
any position other than OFF, it can be rotated without pushing it down. You
may feel a slight bump when it is rotated through min or max positions.
Loading ...
Loading ...
Loading ...