Loading ...
Loading ...
Loading ...
WASH
You will hear the motor and agitator moving the load.
During the first stage of the sensing/wash cycle, water will
partially fill the washer and then begin to move the load. It
is normal to have the sensing light on during this stage. You
will hear the agitator rotate, followed by a several second
pause. This process will repeat for several minutes, allowing
the entire load to become saturated. The lower water
level combined with HE detergent at this stage allows for
concentrated cleaning. Concentrated cleaning delivers the
detergent directly to the soils. It is normal for the load to
be above the water line during this stage. At the beginning
of the second stage, the washer will add water to the
correct level based on the load size. You will hear the
agitator move quicker during this stage of the wash cycle.
The motor sounds may change at different stages in the
wash cycle.
RINSE
You will hear sounds similar 1o the wash cycle as the
washer rinses and moves the load. You may hear the
motor turning on briefly (short hum) to move the basket
while filling.
COMPLETE
Once the cycle is complete, this light will come on. Remove
the load promptly for best results.
LiD LOCKED
To allow for higher spin speeds, the lid
will lock and the Lid Locked light will turn
on. When this light is lit, the lid is locked
and cannot be opened. When this light is
blinking, the washer is paused. When this
light is off, the lid can be opened.
START j
PAUSE i
CANCEL UNOCK LID I
HOLD3 sEc
After a cycle is started, water will enter washer. Lid will be
unlocked during the Sensing/Fill process. If you need to
open the lid to add a garment after this point, you must
press START/Pause and wait for the lid to unlock. The
lid will only unlock after washer movement has stopped.
Depending on where in the cycle you try to pause, it may
take several seconds to several minutes for the lid to
unlock. Press START/Pause to resume the cycle.
SPIN
The washer spins the load at increasing speeds for
proper water removal, based on the selected cycle
and spin speed.
Loading ...
Loading ...
Loading ...