Loading ...
Loading ...
Loading ...
QUESTIONS AND ANSWERS
If the heater cycles ON/OFF without heating:
Please note: This is a smart heater that monitors the room temperature and
produces heat only when needed.
You can set the desired room temperature with the heater in either ECO HIGH
or ECO LOW mode. (The factory default setting is 68 °F.) For an example of
how the heater works, let’s say you set the temperature for 70 °F. Once the
room has reached 70 °F, the heater switches off and the fan stops (Note: The
heater remains on STANDBY as long as you do not POWER OFF). As the
heater remains on STANDBY, it will read the room temperature every 4 minutes
by running the fan ONLY for 60 seconds. During this process, the fan also
blows out the residual heat from inside the chamber to ensure an accurate
temperature reading of the room. If the room temperature is at 70 °F(or higher),
the heater will remain on STANDBY. It will repeat this sensing cycle, reading
the room temperature, every 4 minutes. However, if the room temperature
drops 2 degrees lower than the set temperature, the heating function will turn
the heater ON and the fan will blow warm air.
If the heater cycles but doesn’t produce heat for hours:
If the temperature is set lower than room temperature, the heater will perform
only the sensing cycle and the heater will not turn on in the heating function. To
have the heater turn on, always set the desired temperature higher (2°+) than
the room temperature, or manually select High or Low to have instant heat.
How to turn off the heater:
Switch to STANDBY mode or POWER OFF the heater.
Does the blower cycle use much electricity?
The blower fan will run for 60 seconds every 4 minutes to clear residual heat
Loading ...
Loading ...
Loading ...