Loading ...
Loading ...
Loading ...
14 / EN
Cooker Hood / User Manual
5.3 Wall mounting
A
Use protective gloves and glasses
while performing drilling and cutting
operations.
650mm
Ürün Alt Yüzeyi
903
(Figure 1)
• It is important that the wall is straight, upright
and has sufficient load-bearing capacity.
• Depth of drilling holes must comply with the
length of bolts.
• The bolts and dowels provided are suitable for
brick walls. In case of other constructions (e.g.
plaster, board, porous concrete), it is necessary
to use appropriate dowels and fixing bolts.
A
ATTENTION: Before drilling, ensure
that there are no power, gas or wa-
ter pipes in the close proximity of the
drilling locations.
(Figure 2)
Draw a mid location line from the ceiling perpen-
dicular to the lower edge of the cooker hood.
Take the location line you drew as a reference and
mark points A,B,C,D,E,F,G,H,I,J according to the
measurements in the assembly template (Figure
1).
Drill the marked points E,F,G,H,I,J with Ø6mm drill
and insert 6 Ø6mm plastic dowels in the drilled
holes. Fix the flue connection plate to the wall with
3.9x22 screws (Figure 2).
Drill the marked points A,B,C,D with Ø8mm drill
and insert Ø8mm plastic dowels in the drilled
holes in order to fix the cooker hood body (Figure
2).
Screw 2 4.8x50 suspension screws to points A, B
with a clearance of 5 mm between the screw head
and the wall (Figure 2).
5 Installation of appliance
Loading ...
Loading ...
Loading ...