Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
70
To avoid damaging the wine condi-
tioning unit, the ventilation grille must
be positioned precisely in front of the
vent outlet! If you wish to fit a trim
across the bottom of the wine condi-
tioning unit, make sure it provides
adequate ventilation.
The filler panel must be made exactly
to measure.
Secure the bracketto the back of
filler panel.
Pull the wine conditioning unit as far
as you need to out of the niche so
that you can tilt it towards you.
Loosely screw the bracket with the
filler panel to the wine conditioning
unit.
Align the filler panel to the door of the
wine conditioning unit over the slot-
ted holes to give a flush finish.
Now tighten the screws.
You can now push the wine condi-
tioning unit into the niche.
Pushing the wine conditioning unit
into the niche
Make sure that the power cord does
not become trapped or damaged as
you push the wine conditioning unit
into its installation space.
To avoid damage to the flooring
which is susceptible to scratching,
take great care when pushing the ap-
pliance into the niche.
Push the appliance into the niche un-
til the front of the appliance door is
flush with surrounding furniture
doors.
Pull the wine conditioning unit for-
ward so that it stands proud of the
furniture doors evenly by
1/16" (2mm).
Loading ...
Loading ...
Loading ...