Loading ...
Loading ...
Loading ...
Feature lighting
38
Touch the OK sensor to confirm your
choice.
The set brightness is saved to memory.
The temperature display then appears
again.
As soon as the appliance door is
closed, the set brightness for the fea-
ture lighting takes effect. When the ap-
pliance door is opened, the interior
lighting returns to its normal level.
Lighting duration of the feature light-
ing
The lighting duration for the feature
lighting is set to 30minutes at the fac-
tory.
The lighting duration can be set to 30,
60, 90minutes, up to 00 (unlimited). The
feature lighting will have the brightness
setting you have selected previously.
Open the appliance door.
Touch the On/Off sensor for the fea-
ture lighting so that it is highlighted in
yellow.
Touch the sensor for the feature light-
ing again (approx. two seconds), until
theflashes in the display.
Use the sensors for altering the tem-
perature (and) to set the feature
lighting duration.
The times (in minutes) will flash in the
display.
By touching the sensors
- the lighting duration is reduced by
30minutes
- the lighting duration is increased by
30minutes.
Touch the OK sensor to confirm your
choice.
The selected lighting duration is saved.
The temperature reappears in the dis-
play.
The set lighting duration starts again
whenever the appliance door is opened
and closed.
Risk of injury from LED lighting.
This lighting corresponds to risk
group RG2. If the cover is defective,
there is a risk of eye injury.
If the lighting cover is defective, do
not look from a close range directly
into the lighting with optical instru-
ments (e.g., magnifying glass or simi-
lar).
Loading ...
Loading ...
Loading ...