Loading ...
Loading ...
Loading ...
Page72of78
ITPP047 Thermal Printer Windows Software Manual
Version 2.00
Figure 6- 26 Automatically Sending, Cycle, CutPaper
6.2.7. Firmware Update
Notes: Firmware upgrades are not performed under normal circumstances. If you have special needs, please
contact our technical support team.
Select the firmware BIN file. The two LEDs on the printer will flash at the same time during the update, do not
turn off the power of the printer.
Figure 6- 27 Firmware Update
6.2.8. Factory default
Connect the printer to the computer by a USB cable.
Open "Printer Test V5.1C", clear the input field and check "HEX", enter "1F 1B 1F 11 11", and click "Print".
Figure 6- 28 Factory default
6.2.9. Advanced Uncommon Setting
1) Click the "Advanced" button to set up more features for the print test. The following is the detailed
introduction.
Figure 6- 29 Advanced Button
Loading ...
Loading ...
Loading ...