Loading ...
Loading ...
Loading ...
ASSEMBLY
This power wheelbarrow was partially assembled at the factory. To assemble your machine follow the below instructions.
WHEELS
M10
×
45
×
4
1
M10
×
25
×
4
1.
2.
3.
4.
5.
6.
7.
8.
Lift the rear of the machine up high enough to slide the 7.5"
high block that you can found in the package.
Slide the block under the machine.
Secure the rear wheels, finger tight – for safety do not fully
tighten as the machine could fall off the block.
Once the wheels are secure lift the machine and remove the
block. (See
Figure 3a
)
Lift the front of the machine, re-use the same block and slide
it under the front of the machine.
Secure the wheels nger tight.
Remove the block.
With all 4 tires on the ground tighten the bolts, in a star
pattern for even torque. (See
Figure 3b
)
Figure 2
HANDLES
Mount the handle frame assembly to the frame and secure it with
M10×25 bolts, washers and nuts at the front and M10×45 bolts,
washers and nuts at the rear. (See
Figure 2
)
Figure 3a
Figure 3b
M12
×
16
2
The Power Wheelbarrow tires are directional
and should have the treads pointing forwards for
maximum traction.
10
mm
13
mm
16
mm
18
mm
10
mm
13
mm
16
mm
18
mm
M10x45 (x4)M10x25 (x4)
10
mm
13
mm
18
mm
19
mm
12
mm
7
mm
30
mm
8
mm
X 2
Block
Block
7.5”
7.5”
Block
Block
7.5”
7.5”
7.5”
7.5”
10
Power Wheelbarrow
»
Operator’s Manual
YD4103PM03 - 1807
Assembly
|
Loading ...
Loading ...
Loading ...