Loading ...
Loading ...
Loading ...
Pressthe A or V button to memorize the channels ofthe selected connection.
Pressthe ENTER button to select "Start".
Jfthe antenna is connected to ANT 1 IN (CABLE IN),
select "Cable" and if it is connected to ANT 2 IN
(AiR IN/, select "Air".
If both ANT 1 IN and ANT 2 IN are connected,
select the "Air + Cable'.
if the CableCARD is inserted into the "CableCARD"
slot on the rear panel, "Cable" and "Air + Cable"
are not available.
Whenselectin9 CabJeTV :
Press the A or V button to select "Cable" or "Air + Cable',
then press the ENTER button.
Press the A or V button to select "Digital Channel", then
press the ENTER button_
Press the A or V button to select "STD', "HRC", or "IRC",
press the ENTER button.
Press the A or V button to select "Analog Channel", then
press the ENTER button.
Press the A or V button to select "STD', "HRC", or "IRC',
press the ENTER button.
Press the A or V button to select "Start", then press the
ENTER button to memorize the channels.
STD, HRC, and IRC identify various types of cable
TV systems. Contact your local cable company to
identify the type of cable system that exists in your
particular area. At this point the signal source has
been selected. Proceed to "Storing Channels in
Memory" on page 43.
37
Loading ...
Loading ...
Loading ...