Loading ...
Loading ...
Loading ...
Unpacking and Checking Contents
Tools Needed
Tools required for alignment:
1. Combination Square
2. Combination wrench, 1/4" Hex "L" wrench with #2
phillips tip (supplied)
COMBINATION SQUARE
1/2" SOCKET &
SOCKET WRENCH
HEX "L" W/PHILLIPS WRENCH (SUPPLIED)
COMBINATION SQUARE MUST BE TRUE
DRAW LIGHT
LINE ON BOARD
ALONG THIS EDGE _, ,m . THIS EDGE
PERFECTLY
I
SHOULD BE NO GAP OR OVERLAP
WHEN SQUARE IS FLIPPED
OVER IN DOTTED POSITION
STRAIGHT EDGE OF
BOARD 3/4" THICK
MUST BE
STRAIGHT
Unpacking
WARNING: To avoid injury from unexpected
starting or electrical shock, do not plug the
power cord into a source of power during
unpacking and assembly. This cord must
remain unplugged whenever you are working
on the saw.
These Miter saws, are shipped complete in one box.
NOTE: This manual gives instructions for both
113.235221 compund miter saw and 113.235110 non-
compound miter saw. The two saws are very similar in
design and function. Many parts are identical. The illus-
trations will reflect the compound miter saw when
describing most applications. Illustrations of the non-
compound miter saw will also be given to explain the
features that are unique to that saw.
List of Loose Parts
A. BasicSaw Assembly ................................................. 1
B. Owners Manual Form................................................ 1
C. Dust Elbow ................................................................. 1
WARNING: Although small, this saw is heavy,
to avoid back injury, get help whenever you
have to lift the saw more than 10 inches.
1. Remove the miter saw from the carton by lifting the
saw by the carry handle.
WARNING: If any part is missing or damaged,
do not plug the saw in until the missing or
damaged part is correctly replaced. To avoid
electric shock, use only identical replacement
parts when servicing double insulated tools.
2. Place the saw on a secure stationary work surface
and look the saw over carefully.
B
A
Loading ...
Loading ...
Loading ...