Loading ...
Loading ...
Loading ...
4
5
True HEPA lter
Your air purifier features a True HEPA filter
which removes up to 99.97% of airborne
dust and pollen as small as 0.3 microns
and helps reduce smoke, mould spores and
pet dander from the air passing through the
filter.
Pre-lter
The pre-filter captures large particles from
dust, hair, pet dander to help extend the
filter’s efficiency and life.
Activated carbon lter
Designed to reduce and neutralize odours,
vapours and gases from cooking, smoke,
chemicals, pets, and other unwanted
scents.
Fabric lter
The vacuum-friendly outer fabric catches
larger particles, extending the life of the
main filter.
Ioniser
This appliance has an ioniser feature which
releases negative ions into outgoing filtered
air to help the air purification process.
What are Ions?
Ions are tiny particles that carry a positive
or negative charge. They exist naturally
around us in the air, water, and ground.
Both positive and negative ions are
colourless, odourless, and completely
harmless.
How does the ioniser work?
Negative ions help air purification by
attaching themselves to very small airborne
particles in the room. These particles take
on a negative charge and may join with
positively charged particles such as dust,
pollen, smoke, and pet dander to form
larger particles. The larger particles are
then more easily captured by the filter
system.
Important notes:
Your ioniser may produce an occasional
popping or cracking sound. This is normal
and occurs when a small buildup of ions is
discharged.
After extended use, you may notice dust
around the grilles or panels.
• This is caused by negative ions exiting
the air outlet, evidence of the ioniser’s
air cleaning effectiveness.
• You can remove the dust with a soft
brush or clean, damp cloth. Larger
particles may be attracted to positively
charged surfaces throughout the home,
likewallsoroors.
• This may occur more frequently when
thelterisnearingtheendofitsuseful
product life and unable to capture as
many charged particles.
• Excessive amounts of pet dander,
dust, or smoke may decrease the life
expectancyoftheltersandinterfere
with the ionisation process.
PRODUCT SPECIFICATIONS
CADR Smoke
191m
3
/h
Dust
193m
3
/h
Pollen
205m
3
/h
Noise level
on high
speed
59 dB
max
Fan
speeds
3 Power
consumption
38W
Installing the True HEPA lter
1. TurnOFFandunplugtheairpurier.
2. Locatetheltercoveronthebottomof
the unit.
3. Rotate the knob counterclockwise to
removethecoverandexposethelter
(Figure1-2).
4. Removetheplasticbagfromthelter
andre-insertthelter(Figure3).
5. Re-aligntheltercoverandturnthe
knob clockwise to close.
6. Your unit is equipped with one 3-in1
TrueHEPAlterthatlastsupto12
months depending on usage.
Figure 1 Figure 2 Figure 3
Features of your air purifier Getting started
Operating instructions
1. Placetheunitonadry,stable,andrm
surface. Make sure not to block the top
air outlet vent and air intake grille.
2. Connect the power adaptor to the power
jack located on the rear base of the unit.
Plug the power adaptor into the supply
socket. Note: The display lights will
initiallyashonandthenturnoff.The
power button will remain illuminated
when the unit is plugged in.
3. Tap the power button to turn the unit
ON.
4. When starting up, the appliance will
operate in fan speed 3 by default.
5. To select a desired fan speed, tap the
fan button to cycle through the
speeds1(low),2and3(high)untilthe
desired speed setting is illuminated.
6. To set the timer for 4, 8 or 12 hours,
tap the timer button until the desired
setting is illuminated. When the set
time has elapsed, the appliance will
automatically switch off. To deactivate
the timer, tap the timer button repeatedly
until the timer setting lights are turned
off.
7. To turn the ioniser ON, press the
button once until the white LED light
next to the button is illuminated. Press
the
button again to turn the ioniser
OFF.
8. To turn UV ON, press the button
once until the white LED light next to
the button is illuminated. Press the
button again to turn the UV OFF.
9. To turn night mode ON, tap the
button once. The button will
illuminate and turn the display lights
off. Tap the
button again to turn
night mode OFF. Note: Night mode
will maintain your previous fan speed
setting.
10. To turn the night light ON, press the
button. To turn the night light OFF, press
the
button once more.
11. Important: Always turn OFF and unplug
the unit when not in use.
Loading ...
Loading ...
Loading ...